How to Fix Your Furnace Blowing Cold Air: 7 Causes

Advantages of HVAC Preventive Maintenance

If you have a furnace blowing cold air, the problem may be that your ductwork is clogged or something is wrong with your thermostat. If you notice that your furnace is blowing cold air in the winter or hot air in the summer, there are a few things you can try to fix by contacting a heating service in Magnolia, TX.

What Causes My Furnace to Stop Blowing Warm Air? How to Prevent It?

The Pilot Light is Damaged

Pilot lights are responsible for igniting the main burner and ensuring that your furnace has a constant supply of gas—so if it’s damaged, you won’t be able to heat your home. To test if this is the problem, turn off the thermostat and turn on the furnace. If there’s a pilot light but no heat, it’s likely that the pilot light is damaged.

To Fix This Issue:
  • Check whether any wires leading to the pilot light have been disconnected or damaged.
  • If disconnected or damaged, reconnect them and test your furnace again.
  • If everything seems fine, but there isn’t any heat from your furnace, call a heating service in Magnolia, TX, for help.
  • If you want to fix the issue then contact Valliere Heating, we provide one of the best heater replacement Cypress, TX at an affordable price.

Flame Detectors Have Dirt or Dust

The flame detector is another important component of your furnace because it prevents gas from being released into your home. If dirt or dust builds up on this component, it will prevent it from working properly. To clean the flame detector, remove it from your furnace and gently wipe any dirt or grime off its surface with a damp cloth.

The Air Filter is Clogged

The air filter is likely clogged if your furnace is not blowing warm air. To solve this, you need to clean or replace the filter. First, remove the cover to expose the air filter. You can vacuum if the filter is dirty but not completely clogged. If there are large particles of debris in the filter, you’ll need to purchase and install a replacement filter.

Low Gas Supply

If your furnace is blowing cold air, it could be because your gas supply is low. This can happen for various reasons: maybe someone turned off your heat without telling anyone else in the house or accidentally turned off their gas. Regardless of what caused the problem, you’ll need to call the heating repair the Woodlands, to repair it before you can turn on your heat again.

Thermostat Issues

The thermostat that controls your furnace might be set at too low of a temperature or broken altogether. To avoid this issue, ensure every room in your home has a separate thermostat so you can control each room temperature independently.

Final Word

We believe in providing the best cypress heating repair services at Valliere HVAC. We are committed to providing you with a high-quality service that will help your heating system run efficiently for many years.

If you’re looking for a reliable, honest HVAC company that can provide you with quality heating repair services, Call us today!

7 Tips For A Smooth Furnace Replacement

During winters in Texas, the furnace is your best partner. Are you planning to have your furnace replaced before the upcoming winter? There is a lot that can go wrong, but it doesn’t have to be that way. After deliberation, we’ve brought together our top 7 tips that will simplify the service. So, get ready to call for a furnace replacement in Tomball, TX!

Tips For Smooth Furnace Replacement

1. New Units Come With Air Quality Enhancements

New units available in the market can help you improve the indoor air quality of your home. These often use better filters and coils that ensure higher safety and cleanliness. They also trap smaller dust particles.

2. Furnace Reliability And Contractor Experience Require 60% Of Your Focus

Instead of focusing your attention on which brand of furnace you should buy, focus on the reliability of the unit and the contractor’s experience. A well-known brand may not have a unit suitable for your home. However, contractor experience goes a long way in making a difference for your HVAC unit.

3. Buying A Regular Maintenance Contract With A New Furnace Is Cheaper

Opt to buy a maintenance and inspection contract when you’re installing a new furnace. Most contractors who provide furnace repair in Tomball, also provide these contracts. Therefore, they may be able to provide a discount or promotion.

4. AFUE Ratings Deserve In-Depth Research

AFUE ratings of a heating unit define its efficiency. AFUE is the measure of how much energy is produced per unit of fuel. They have the same principle as SEER ratings. However, their rating methods are different. When you do in-depth research on AFUE ratings, you understand the difference in the quality of different heaters. Look at the AFUE ratings of each model you look at.

5. Choose A Contractor That Is Registered With The Federal Government

Many contractors provide heating replacement services. If you want to narrow down from a long list of contractors, you only need to know whether they are licensed and registered. According to the Federal government rules, HVAC contractors are required to be registered with the government.

6. Don’t Rely Entirely On Online Customer Reviews

Online customer reviews can be natural or fake. So instead, look for the contractor’s experience and services. For example, a contractor that has completed formal training and apprenticeship should be chosen over one who doesn’t have any. You can also ask your family and friends for some recommendations.

7. There Are More Financing Options Available Than You Expect

Most contractors provide financing options to their customers. You can ask for a customized financial plan. This often includes minimum monthly payments and affordable interest rates. Some contractors even provide promotions and discounts for exceptional cases like veterans, firefighters, first responders, nurses, senior citizens, and doctors.

If you haven’t found a contractor already, choose Valliere Air Conditioning and Heating LLC, a licensed and registered, professional company that has experience providing heat pump repair in the Woodlands and furnace installation near you . Book our services by calling (281)-356-3311 or dropping a mail at [email protected].